Siruba L818fm1 Error List Work Jun 2026

Remove any source of electrical noise (such as other high-power machinery) near the machine. Restart the machine. Check if the position detector plug is secure. Look for damaged cables on the top of the handwheel area. If E9 Appears (Solenoid Defect):

Below is the full, verified list of errors. For each error, we explain and the work solution .

If the machine beeps continuously or refuses to start, immediately check the display. Never force the handwheel—it can burn out the direct-drive motor. siruba l818fm1 error list work

⚠️ Do not rely on these generic codes – they vary by brand and firmware version.

Before diving into the error list, you must understand how the machine communicates. The L818F-M1 uses a digital display showing: Remove any source of electrical noise (such as

The appears when the main board cannot verify the exact rotation speed or angle of the direct-drive motor.

Unplug, clean out any lint or dust, and firmly reseat the connector. E07 / ERR3 — Motor Locked-Rotor Error Look for damaged cables on the top of the handwheel area

Inspect solenoid wiring under the machine bed for pinch points. Safety Switch Active The machine head is tilted back onto its safety rest.