is a classic Wireless N300 Access Point and Range Extender, valued for its flexibility in creating or scaling wireless networks. However, keeping its operating system current is critical for network performance and safety.
Firmware designed for Hardware Revision E will permanently brick a Hardware Revision D device. How to Find Your Hardware Revision Turn the DAP-1360 upside down. Locate the white barcode sticker on the bottom casing. Look for the text string labeled H/W Ver: or HW: .
Is your D-Link DAP-1360 Wireless N300 Access Point experiencing connectivity issues, slow speeds, or security vulnerabilities? Downloading and installing the is the most effective way to address these issues and ensure your device operates at peak performance. Firmware updates from D-Link often patch security holes, improve wireless stability, and enhance the overall user experience.
If your previous configuration settings cause instability under firmware 6.10, a clean system wipe is recommended: Dap-1360 Firmware 6.10 Download
Hardware revision mismatch. Solution: Double-check your sticker. If your device says Rev C1, do not flash Rev D firmware.
Go to the System or Maintenance tab. Find Firmware Upgrade: Select Firmware Update .
Advanced users often replace D-Link firmware with OpenWRT. However, for 99% of users, because: is a classic Wireless N300 Access Point and
Look at the sticker on the bottom or back of your DAP-1360. Locate the text next to "H/W Ver:" (e.g., A1, B1, C1, D1, E1, F1).
Download. DAP-1360. Download direct: https://files.dlink.com.au/products/DAP-1360. REV F. Software. No Software Available.pdf (22. D-Link Australia
Enter the default IP address in the address bar: 192.168.0.50 (or http://dlinkap.local ). How to Find Your Hardware Revision Turn the
Ensure your hardware is Revision F (or the specific version compatible with the 6.10 branch).
Connect your computer directly to one of the DAP‑1360’s LAN ports. Do not perform the update over Wi‑Fi – it can be interrupted and lead to failure.
If you are using Universal Repeater mode (Wi-Fi bridging), go to > Performance and enable No Acknowledgement . This reduces latency by 15ms in 6.10.
D-Link DAP-1360 is a versatile Wireless N range extender and access point, but its legacy status means that specific firmware versions like are critical for both functionality and security. Overview of Firmware 6.10
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.