Stenhoj Ds2 Manual

If stable, continue pressing the button to raise the vehicle to the desired working height. Step 3: Lowering the Vehicle

Twin-motor electromechanical drive using a "spindle and nut" mechanism. Lifting Height: Approximately 1900mm–2000mm.

This nut carries the weight of the vehicle during normal operation. It is often made of high-quality bronze or specialized synthetic polymer to minimize friction against the steel screw.

Check the hydraulic oil level and the electrical supply phase. stenhoj ds2 manual

Before diving into the technical intricacies, a quick overview of the DS2's operating principle is beneficial. The Stenhoj DS2 is fundamentally a . This means the main drive motor rotates a long threaded spindle, which moves the lift carriage up or down. A chain synchronizes this movement between the primary and secondary ("slave") columns, ensuring the vehicle is raised levelly. This robust mechanical design has proven remarkably durable, with many units from the late 1970s and 1980s still in service today.

Place the lifting arms under the vehicle’s recommended lifting points.

3-Phase 400V, 50Hz (Standard European workshop configuration) Foundation and Installation Requirements If stable, continue pressing the button to raise

Drive the vehicle centrally between the posts. The center of gravity must align with the parameters defined in the manual's loading diagrams.

Ensure all phases of the 3-phase power are active and the main isolator switch is ON.

An authentic factory manual is divided into distinct sections designed for different stages of the lift's lifecycle. If you are referencing a Stenhøj manual archive, you will typically find the following chapters: Technical Specifications & Floor Requirements This nut carries the weight of the vehicle

Verify the functionality of the lift controls (Up/Down buttons and emergency stop).

The Stenhoj DS2 is engineered with multiple redundant safety systems to protect mechanics in the bay.

Do you have a or a floor-frame (chain-driven) model?

Typically 3,000 kg - 3,500 kg (3.0 - 3.5 tons), depending on the specific model variation. Lifting Time: Approximately 30-45 seconds. Drive System: Electro-mechanical (screw/nut design).