Start at least 3–4 feet away from the surface and move closer to increase pressure.
Water left inside the pump will freeze, crack the housing, and destroy your new ROK washer.
Fill the fuel tank with fresh, unleaded petrol (minimum 91 octane). Do not use fuel containing more than 10% ethanol (E10), as it can degrade the fuel lines. Fuel Valve: Turn the fuel lever to the "ON" position. 4. Bleeding the System (Crucial Step)
What is the listed on its silver data plate?
Operating a new (or similar models like RocwooD ) requires careful assembly and a specific startup sequence to prevent damaging the pump seals. This guide outlines the essential steps for setting up and using your new machine safely. 1. Assembly and Connection rok power washer instructions new
: Use the included foam gun or detergent bottle. Attach it to the wand using the quick-connect fitting for low-pressure soap application. 4. Maintenance & Safety Guidelines Task Water Filter Before every use Check the inlet filter for debris and rinse if necessary. Nozzle Cleaning Monthly / As needed Use the included cleanout tool to remove clogs. Pump Protection After every use
Avoid extension cords if possible. If you must use one, ensure it is a heavy-duty, weather-resistant cord rated for the machine's amperage to prevent voltage drops. For Petrol ROK Models
New models typically require minimal tool-based assembly, usually involving a Phillips head screwdriver for specific parts. Wheels & Handle
Attach your garden hose to the water inlet adapter on the machine. 2. Pre-Operation Setup (Crucial) Start at least 3–4 feet away from the
Fill the fuel tank with regular unleaded petrol. Do not use old fuel, and do not mix oil with the petrol unless you have a specific 2-stroke model. 5. Connecting the Water Supply
Thread the spray lance (wand) into the front of the spray gun trigger. Twist it clockwise until it is completely tight. If your model uses a quick-connect lance, pull back the collar, push the lance in, and release the collar to lock it. 4. The Critical Pre-Start Checklist
Power washing is one of the most satisfying ways to restore the look of your home, driveway, deck, and vehicles. If you have just purchased a , you have a versatile tool designed to make heavy-duty cleaning tasks efficient.
Before plugging in or fueling up your machine, you must assemble the core components correctly to prevent leaks and pressure loss. Inspect the Package Do not use fuel containing more than 10%
: Intense, pinpoint spray for stubborn stains on concrete. Orange (15°) : Stripping and heavy cleaning. Green (25°) : General cleaning (decks, driveways). White (40°) : Delicate surfaces (siding, cars, windows). 3. Operating Instructions (Electric Models)
) until a steady stream of water—without bubbles or sputtering—comes out of the nozzle. This can take up to 5 minutes for long hoses.
ROK Power Washer Instructions: New Unit Setup & Usage Guide Congratulations on your new ROK power washer! Whether you are cleaning siding, a deck, a driveway, or your car, a ROK pressure washer is designed to provide high-pressure cleaning power efficiently.
Slide the upper handle frame into the lower frame slots on the main unit. Secure it tightly using the provided bolts and plastic knobs.
: Connect the threaded end of the 25-foot high-pressure hose to the water outlet on the machine and the other end to the base of the trigger gun.