Service Tool V3800 Best __hot__ - Canon

Before using the tool, you must put your Canon printer into . The tool will not work if the printer is not in this mode. Step 1: Entering Service Mode Turn off your printer.

Next, go to the section below it, ensure the value is set to 0% , and click Set .

It is highly recommended to physically clean the absorber pads or replace them after resetting the counter twice. canon service tool v3800 best

In the tool, click under the "Clear Ink Absorber Counter" section.

Before the software can interact with the printer, you must place the printer into "Service Mode" or "Maintenance Mode." Before using the tool, you must put your Canon printer into

Download and extract to your desktop.

The v3800 version was released around 2013 and is optimized for models from that era. Next, go to the section below it, ensure

Turn off the printer using its power button, wait 10 seconds, and turn it back on normally. Critical Safety Warning: The Physical Pads

The is a specialized utility used primarily by technicians and advanced users to reset the internal "waste ink absorber" counter (often called the "pampers" counter) on Canon PIXMA printers. When this counter reaches its limit, the printer will stop functioning and display errors like 5B00 or 1700 . Key Uses of Service Tool v3800

The "best" version is a clean executable.

Resetting the digital counter with the Canon Service Tool v3800 tells the printer that the waste ink pads are empty, but .