Do not install near supply registers, exterior doors, or direct sunlight.
The Trane Baysens019c thermostat offers precise temperature control, energy efficiency, and ease of use. By following the installation, operation, and maintenance guidelines outlined in this manual, users can ensure optimal performance and longevity of the thermostat. If you have any questions or concerns, consult the troubleshooting guide or contact Trane customer support for assistance.
It features a 7-day programmable interface that supports 2, 3, or 4 daily occupancy periods. Energy Efficiency: trane baysens019c manual
Note: Use 18 AWG shielded or unshielded thermostat wire. For wire runs exceeding 150 feet, shielded twisted-pair cable is highly recommended to prevent electrical interference. 3. Installation and Mounting Instructions Step 1: Location Selection
Use the to adjust the current hour and minutes. Press Clock again to select the correct day of the week. Press Done to save. Programming the 7-Day Schedule Press the Schedule or Program button. Do not install near supply registers, exterior doors,
The Trane Baysens019c is a digital thermostat that offers precise temperature control and energy efficiency. It is designed to work with Trane HVAC systems, providing a seamless and integrated solution for heating and cooling control. The Baysens019c features a user-friendly interface, allowing homeowners and building managers to easily adjust temperature settings and monitor system performance.
Mount the sub-base securely to the wall, then snap the sensor body onto the base. 3. Programming Instructions If you have any questions or concerns, consult
| Terminal | Signal | Notes | |----------|--------|-------| | | HEAT status indicator | On = Heating Mode; Flashing = system failure in heating mode | | 8 | COOL status indicator | On = Cooling Mode; Flashing = system failure in cooling mode | | 9 | ON (System On) indicator | Colon flashing = System On; solid colon = System Off | | 10 | SERVICE indicator | On = Service required; Flashing = fan failure | | 11 | 24 VAC Common | Power supply and shield ground for remote sensor | | 12 | Data communication | Serial link to Unit Control Module | | 14 | 24 VAC Hot | Operating power | | S1 / S2 | Remote zone temperature sensor | For BAYSENS017B thermistor sensor | | Aux Relay (Form C) | Occupied period signal | 1.25 Amps at 30 VAC |