Audiosonic Caa-09169 Clock Radio Manual Work

Fully extend and adjust the position of the wire antenna hanging from the back of the unit. Do not alter or connect it to an outside antenna.

: Unplug the AC power cord from the wall outlet and remove the 9V backup battery. Leave the unit completely disconnected for 2 to 3 minutes. Reinsert the power cord and battery to perform a hard factory reset, then reconfigure the time. Specifications Power Source : AC 230V ~ 50Hz Battery Backup : 1 x 9V Battery (6F22) Frequency Range : FM 87.5 - 108 MHz / AM 522 - 1620 kHz Display : Red/Green LED digits

If you need a , I recommend checking:

: An indicator dot will light up next to the "BUZZ" icon. The clock will emit a traditional beeping sound at the scheduled time.

While the alarm time is flashing, use the HOUR and MIN buttons to select your wake-up time. Audiosonic Caa-09169 Clock Radio Manual WORK

Press the button to adjust the hour. Note: Ensure the PM indicator is on if it is afternoon. Press the "Min" button to adjust the minutes. Press the "Time Set" button again to confirm. 2. Operating the Radio: Tuning and Presets

The "work" of the Audiosonic CAA-09169 lies in its simple design, relying on the Set/Mem button for almost all configuration needs. AudioSonic Clockradio MW / FM Radio Instruction Manual Fully extend and adjust the position of the

To turn off the alarm for the day but keep it active for the next day, press the ALARM OFF button.