Usb-c Console Driver ~repack~ | Checkpoint
Updated for Check Point GAiA R81.20 and Windows 11 22H2. Last tested on Quantum Spark 1570 and 1800 appliances.
| Aspect | Rating (out of 5) | |--------|------------------| | Hardware build quality | ⭐⭐⭐⭐ | | Driver availability (official) | ⭐⭐ | | Cross-platform support | ⭐⭐⭐ | | Ease of use (non-technical) | ⭐⭐ | | Reliability after correct driver install | ⭐⭐⭐⭐ |
You are using a passive USB-C cable. Some USB-C cables are charge-only and lack data lines. Fix: Use a certified USB-C 3.1 data cable or the original cable that shipped with your Check Point appliance. checkpoint usb-c console driver
Network administrators managing modern Check Point hardware will inevitably encounter the transition from traditional RJ45 or DB9 serial connections to modern USB-C console ports. Newer Check Point appliances utilize a USB-C interface for direct command-line access during initial deployment, recovery, and out-of-band management.
Open Terminal and run ls /dev/cu.* . Your console device will appear as something similar to /dev/cu.usbserial-XXXX . Updated for Check Point GAiA R81
Download the CP210x Windows Drivers from Silicon Labs sk159712. 3. Installation Steps Download the zip file. Extract the contents of the zip file. Run the installer ( CP210xVCPInstaller_x64.exe or x86.exe ). Follow the on-screen prompts to complete the installation. Restart your computer if prompted.
How to Install the Check Point USB-C Console Driver (Step-by-Step) 1. Download the Correct Driver Some USB-C cables are charge-only and lack data lines
Comprehensive Guide to Check Point USB-C Console Drivers and Setup
Windows often struggles with proprietary USB-serial chips, and Check Point appliances are no exception. Here is the step-by-step process to get connected:
