If you still cannot find the driver, contact DigiPos support directly with your printer's serial number – they will email you the correct .inf file within 24 hours.
To download the Digipos Ds-800 driver, follow these steps:
If the file is not named Digipos_DS800...exe or signed by "Digipos Corp" or "POSBANK," delete it immediately.
If the touch feature is not working after a Windows update: Digipos Ds-800 Driver Download
Clone a working DS-800. Use Clonezilla to image a fully patched DS-800 to identical hardware. This copies the drivers and registry settings.
| Issue | Probable Cause | Solution | |-------|----------------|----------| | Driver not found during install | Missing .inf or unsigned driver | Disable driver signature enforcement (Windows 10/11) | | Prints garbled text | Wrong emulation mode | Set DS-800 to ESC/POS mode via DIP switch #2 | | USB not detected | Missing VID/PID | Add VID_0B05&PID_1A00 to driver .inf | | Cash drawer not opening | Pin mismatch | Set jumper to pin 2-3 (active high) |
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. If you still cannot find the driver, contact
: Go to Control Panel > Devices and Printers . Right-click the printer, select Printer Properties , and ensure the Port tab matches your connection (e.g., USB001 or COM1).
: Most downloads come as a ZIP file. Extract the contents and run the USBXpressInstaller or similar setup executable.
Since the DS-800 is a legacy terminal design, older installers might reject newer operating systems. Right-click the driver's setup file, go to Properties , click the Compatibility tab, check Run this program in compatibility mode for , and choose Windows 7 . Best Practices for Maintaining Your POS Terminal Use Clonezilla to image a fully patched DS-800
Downloading and installing the driver for the Digipos DS-800 thermal receipt printer
To help find the exact file you need, please share your (e.g., Windows 10, Windows 7, POSReady). If you have specific details about the hardware connection type (USB, Serial/COM, or Parallel), let me know so we can narrow down the setup steps.
Download the verified DS-800 driver package from your POS vendor or corporate network share. Right-click the ZIP file and select .
file for your operating system and extract (unzip) the contents. Run Installer : Locate and run the USBXpressInstaller (for USB connections) or the for the Windows Application. Hardware Connection
: Specialized retail support sites like Epos Traders provide direct links to Windows drivers and manuals. Quick Installation Guide