Audi+a3+8v+coding+list -

Außenlicht_Front → Tagfahrlicht Aktivierung durch BAP... → Change to Active Deactivate DRL with Handbrake Engaged

| Feature | Instructions | | :--- | :--- | | | DRL dims or turns off when blinker is on. 09 > Adaptations > Turn signal front > Dimmwert AB (Reduce to 0 for off) | | Alarm Chirp on Lock/Unlock | Audible confirmation (requires factory alarm). 09 > Adaptations > Acknowledgement signals > Akustische Rueckmeldung entriegeln (Unlock) & verriegeln (Lock) > Active | | Scandinavian DRLs | Rear tail lights ON with DRLs. 09 > Coding > Byte 4 > Enable Bit 6 & Bit 7 | | Comfort Blinking Cycles | Change number of blinks (default 3). 09 > Adaptations > Comfort flashing > Anzahl der Komfortblinkungen (Set to 1-5; 5 is max) | | Coming/Leaving Home via Fog Lights | Instead of low beams. 09 > Adaptations > Leaving-Home Light > Light function > Nebellicht (Fog light) |

Adjust how your keys, mirrors, and climate controls interact with daily use. Passenger Mirror Dip in Reverse

Change Funk Spiegelanklappen (Remote mirror folding) to audi+a3+8v+coding+list

Enable digital speed display in cluster / remove mph conversion

Simple adaptation changes rarely void a warranty. However, if a modification directly causes an electronic component to fail, Audi dealers may deny coverage for that specific part. Why doesn't the mirror dip work?

Make your Audi beep when locking or unlocking (requires alarm system). 09 - Central Electrics Außenlicht_Front → Tagfahrlicht Aktivierung durch BAP

Module 09 -> Adaptation -> Daytime Running Lights -> Tagfahrlicht -> Active.

| | Path / Adaptation Channel | New Value | Security Access | Notes | | :--- | :--- | :--- | :--- | :--- | | Audible Lock/Unlock Confirmation (Beep) | 46 → Adaptation → (Lock confirmation via horn) | Active (or "Both") | 31347 | "Beep" for lock; "Double-beep" for unlock. | | Alarm Beep on Lock (EU/US spec) | 09 → Adaptation → (1)-Acknowledgement signals-Akustische Rueckmeldung entriegeln | Active | 31347 | Adds short chirp. Extremely popular. |

Permanently disables the intrusive engine start-stop feature by altering the minimum voltage requirement threshold. Select Go to Adaptation (10) Search for: Start_stop_voltage_limit 09 > Adaptations > Leaving-Home Light > Light

: Displays the approximate number of liters/gallons required to fill up the tank. Module : [17 - Instruments] Coding : Go to Coding → Long Coding Helper. Select Byte 10. Enable Bit 4 (Volume to be replenished) . 2. Lighting Visuals & Conveniences

Below is a categorized list of popular modifications.

Increase volume from phone microphone / enable voice activation options