| Component | HPE Custom Version (Example) | Vanilla VMware Equivalent | Purpose | |-----------|------------------------------|----------------------------|---------| | | 11.6.0 | Not present | Hardware monitoring, iLO integration | | hpdsa (Dynamic Smart Array) | 6.6.0.250 | None | Support for Smart Array RAID controllers | | hpbootcfg | 1.0.0 | None | Boot-from-SAN configuration | | hponcfg | 5.1.0 | None | Scripted iLO configuration | | qpige3 (Broadcom NIC) | 1.8.0 | Generic tg3 | Enhanced 10GbE/25GbE support | | i40enu (Intel XL710) | 1.11.5 | Older version | Better SR-IOV and RSS performance |
Updated: May 2026
Access the VMware Cloud Foundation or vSphere section. Use the search function to locate "ESXi 6.5 Update 3" and look for the Custom ISOs tab.
The installer loaded successfully. He reached the screen asking him to select a disk to install ESXi. The list populated.
For example, for a Gen9 server, the command might look like this: download hpe custom image for esxi 6.5 u3
Elias selected . The ISO was for bootable installations. The ZIP was for updating via VMware Update Manager (VUM). Since these were new servers with blank drives, he needed the ISO to burn to his flash drive.
Seamless integration with HPE Systems Insight Manager (SIM) and iLO repository for updates. Download HPE Custom Image for ESXi 6.5 U3
If remote console access is unavailable, use a tool like to write the ISO file to a physical USB flash drive. Ensure you select the "MBR partition scheme for BIOS or UEFI" to maintain compatibility with older ProLiant server generations.
Click on in the upper right corner. Log in with your registered enterprise credentials. If you do not have an account, you must create one and associate it with your site ID or entitlement. Step 2: Navigate to VMware Cloud Foundation | Component | HPE Custom Version (Example) |
Filter the results by selecting or Drivers & Software from the content type sidebar.
If you are running ProLiant Gen9 or Gen10, using the HPE custom ISO is strongly advised over the generic VMware image to ensure full hardware support. If you'd like, I can:
To ensure stability and full management integration, you must use the official HPE Custom Image for ESXi 6.5 Update 3 (U3). This comprehensive guide walks you through finding, downloading, and deploying this specific hypervisor image. Why You Need the HPE Custom Image
Elias smiled. The storage controller was visible. The download had been the key. He pressed Enter to continue. The installation began. He reached the screen asking him to select
Once you've verified the custom image, you can use it to:
Verify with:
Verify the release date and the specific build number to ensure it matches your requirements (e.g., matching a specific HPE SPP recipe). Click the or Download button.