Jobmate 1500 Manual Page

The Jobmate 1500 relies on speed, not pressure, to do the work.

Press and hold the black button located near the metal nose cap of the tool. Rotate the shaft by hand until the lock clicks into place.

Start by unfolding the steel legs. Ensure the locking braces click firmly into place. jobmate 1500 manual

(Gallons Per Minute), balancing cleaning power with low water consumption. : Equipped with a 1400W–1500W

Check the parts list to ensure no nuts, bolts, or springs are missing. Step 2: Base Frame Assembly The Jobmate 1500 relies on speed, not pressure,

: Check the water inlet filter for debris and clean it if necessary. Ensure the garden hose is not kinked. Nozzle Care

After turning off the machine, always turn off the water source and squeeze the trigger to release remaining pressure. 5. Troubleshooting Common Issues Start by unfolding the steel legs

Tie back long hair, avoid loose garments, and remove jewelry that could become entangled in the spinning spindle.

Located near the rear of the tool, numbered 1 through 6 (or min to max) to adjust the RPM.