Wittmann Tempro Plus D 360 Manual Exclusive Upd

The is a high-performance temperature control unit (TCU) within the pressurized water series, specifically designed for applications requiring graduated temperature ranges up to

: A mold symbol changes colour to provide immediate status: green for within tolerance, red for too hot, and blue for too cold.

Check the oil level sight glass or digital level indicator before powering on.

The capabilities of the Wittmann Tempro Plus D series have been validated in real-world industrial settings. In a comprehensive test conducted by Fischer Elektronik GmbH & Co. KG, several temperature controllers were subjected to rigorous scrutiny. The Fischer team focused on key parameters such as the accuracy of temperature control up to 160 °C, the monitoring of tight tolerance margins in flow measurement, and overall user-friendliness.

Clogged mold cooling channels, a closed valve, or a blocked internal strainer. wittmann tempro plus d 360 manual exclusive

Standard equipment includes automatic filling, constant pressure monitoring, pump rotation detection, and sensor break monitoring to prevent dry-running or overheating.

Ensure supply water pressure meets the minimum threshold outlined in your machine's physical documentation (typically requires a minimum of 2-3 bar supply pressure). 6. Safety Protocols for High-Temperature Operation

This content is structured to be suitable for a product brochure, a technical blog post, or an equipment sales listing.

Ensure all external hoses connected to the mold are strictly rated for high-temperature, high-pressure water applications. Standard hydraulic or low-temperature water hoses can fail catastrophically. Summary for Plant Managers The is a high-performance temperature control unit (TCU)

Automatically keeps the pump running after the heater is deactivated until a pre-defined "safe" temperature is reached. Cooling & Purge Off:

Clean the cooling water inlet strainers to maintain maximum cooling efficiency.

| Specification | Value / Detail | | :--- | :--- | | | Tempro plus D (Touch-Screen Series) | | System Type | Pressurized water circulation | | Max Temperature | 360 °F (approx. 182 °C) | | Heating Capacity | 24 kW (Standard, upgradable options available) | | Pump Motor | 1.3 HP (Magnetic-drive or frequency-controlled options) | | Power Supply | 480V, 3-Phase | | Control Interface | Full-color touch-screen display | | Zones | Available in single or dual-zone configurations | | Key Features | Precision microprocessor control (±0.5°C accuracy), direct/indirect cooling, automatic pump rotation detection, over-temperature monitoring |

WITTMANN's philosophy behind the Tempro series is consistent: smaller is smarter. By incorporating a smaller heat exchanger, the circulating water volume is minimized. This design choice leads to significantly shorter preheating and cooling times, directly translating to faster cycle times and increased productivity. This foundational principle is evident across the entire line, including the D360. In a comprehensive test conducted by Fischer Elektronik

Visually inspect all hoses, couplings, and mold manifolds for trace oil leaks.

Includes constant pressure monitoring, automatic filling, and pump rotation detection.

Start the pump using the interface controls. Allow the oil to circulate at room temperature for several minutes to vent trapped air from the circuit.