Avoid placing the unit in direct sunlight, tight enclosures, or unventilated cabinets. 3. Electrical Requirements : Do not use an extension cord or adapter.
: Position the appliance on a hard, flat, level surface. Maintain at least 4 inches of free clearance at the back and both sides to guarantee proper airflow and prevent compressor overheating.
on the back and sides. Most importantly, they adjusted the two leveling feet at the back to ensure it sat perfectly still, preventing the "vibration song" the compressor might otherwise sing. KIBO Commerce The Golden Rules of Hydration viva water dispenser manual 8liech-sc-ssd
While this manual is tailored for the 8LIECH-SC-SSD , many instructions also apply to closely related Viva models (such as the 7LIECH-SC-SSF and 8LIECH-SC-SSF). Always refer to your unit’s specific labels and included documentation when in doubt.
Place the dispenser in a location that meets the following conditions: Avoid placing the unit in direct sunlight, tight
Most "leaks" are actually pinhole cracks in the water bottle itself, which breaks the vacuum. Try a different bottle before calling for a repair. : To keep the water tasting fresh, experts from Merry Maids
Use only known and microbiologically safe — spring water, purified water, or distilled water are all acceptable. Do not use tap water unless you are certain it has been properly treated. Never use any liquid other than water, as beverages containing sugar, acids (citrus juice), or alcohol will permanently damage the internal tank and void your warranty. : Position the appliance on a hard, flat, level surface
: Under 100 Watts utilizing an "Ice Bank" to maintain cold water at 3°C–10°C (37.4°F–50°F)
If your unit has stainless steel trim, clean it using a soft cloth and a mild stainless steel cleaner, always wiping to avoid visible scratch marks. Do not use abrasive pads or harsh chemicals such as bleach directly on stainless steel surfaces, as these can permanently discolor the finish.