Provides precise current control with PID action for closed-loop position monitoring when used with valves featuring an LVDT (Linear Variable Differential Transformer) feedback signal.

Features adjustable ramp timing for smooth acceleration and deceleration of the hydraulic load. These ramps can often be deactivated externally if required.

While specific manuals are often archived under technical documentation for larger systems, these amplifier cards generally share several core features:

| Symbol | Function | Manual Reference | |--------|----------|------------------| | | Return to main menu | Section 4.2 | | Gear Icon | Advanced system settings | Section 7.0 | | Arrow Circle | Data sync / cloud backup | Section 9.3 | | Wrench Icon | Diagnostic mode (if applicable) | Section 5.1 |

(part number ) is an industrial Valve Amplifier Card designed to provide precise current control for proportional solenoids in hydraulic systems.

Related search suggestions:

: Scales the amplifier's current response relative to the incoming command voltage to fine-tune system responsiveness.

: Maximum 2.5 A depending on the solenoid type.

Slide out the dual mesh filters from the top intake. Rinse with lukewarm water and a mild detergent. Allow them to air-dry completely before reinserting. Every 6 Months

The official user manual is the definitive source for safe and proper operation. For a card like the QV60-RGC1, the manufacturer is , a subsidiary of the Bosch Group focused on drive and control technologies. Your first step for support should be the official Bosch Rexroth website.

Verify that the 0-10V control wire has a voltage greater than 1.5V DC, or bridge +10V to 0-10V input to force a full-speed test. Thermal overload tripped.