V2000-c Rfid Access Control User Manual -

This procedure will reset the system password only to the factory default 12345 . It will not delete your registered users. For a full reset, consult your specific device manual.

is a reliable, standalone single-door access controller designed to secure doors, gates, and commercial entry points . Operating primarily on a , this rugged device features an integrated contactless EM RFID reader and an illuminated keypad. It supports up to 2,000 distinct users , giving administrators the flexibility to grant access via proximity cards, custom PIN codes, or a combination of both.

Are you using a or a 13.56MHz Mifare version of the V2000-C? V2000-c Rfid Access Control User Manual

This process only resets the System Password to the factory default 12345 . It does not delete your existing user card database.

For more information on the V2000-C RFID access control system, please refer to the following resources: This procedure will reset the system password only

The Ultimate Setup & Troubleshooting Guide for the V2000-C RFID Access Control System

A: The system password can be reset to the factory default 12345 by performing the System Initialisation procedure. This will not delete your user cards. Are you using a or a 13

Features an anti-tamper alarm and built-in buzzer. 2. Technical Specifications Operating Voltage: 12V DC (usually 12V-24V DC or AC) Card Type: 125kHz EM RFID Card/Fob Reading Distance: 3-6 cm Lock Output Load: Max 3 Amp Environment: -20°C to 60°C (-4°F to 140°F) 3. Installation Guide (V2000-c)