: Enter the receiving frequency (e.g., 400.00000 MHz to 470.00000 MHz depending on your specific UHF sub-model).
The SMP468 is often programmed using a generic utility named or labeled "MP-468_CPS.exe" . Common version numbers encountered:
Enter your transmitting frequency (match RX for simplex/direct mode, or offset for repeaters).
: Input your transmitting frequency. Keep this identical to the RX frequency for simplex operation, or offset it for repeater use.
: Configure DTMF signaling, ANI (Automatic Number Identification), and PTT ID settings for fleet identification. Setup Requirements motorola smp 468 programming software
Turn the radio volume knob clockwise to . Ensure the battery is fully charged.
Fully charge the battery. Firmly press the 2-pin connector into the radio housing. Mismatched CTCSS/DCS privacy codes or mismatched bandwidth.
If a yellow warning icon appears, download and install the latest or FTDI USB-to-Serial driver . Note the assigned COM Port number (e.g., COM3). 2. Install the SMP468 CPS Software
To use the programming software, you typically need the following: : Enter the receiving frequency (e
Acquire the CPS software from a reputable Motorola dealer or authorized source, as shown in the official Motorola software page .
: A compatible USB-to-serial programming cable that connects the PC to the radio's side accessory port.
The software provides access to several critical radio settings: Channel Configuration Transmit (TX) and Receive (RX) frequencies for each of the 128 channels. Signaling Settings : Configure CTCSS/CDCSS
: Double-check Device Manager to ensure the software matches the actual active Windows COM port. : Input your transmitting frequency
Navigate to immediately to save this original configuration file (.dat or .pps format) as a backup. Step 5: Customizing Key Parameters
Toggle VOX (voice-activated transmit), Squelch levels, and Time-Out Timers (TOT).
Input precise UHF frequencies (typically within the 400–470 MHz range).
Disclaimer: Information is provided for informational purposes only. Please adhere to your local regulations regarding radio communications and software use. Always consult your device’s manual for official guidance.
The Motorola SMP 468 is a portable two-way radio used by public safety, government, and enterprise customers. To program and configure the radio, Motorola provides a software tool called Motorola SMP 468 Programming Software. This guide will walk you through the features, installation, and usage of the Motorola SMP 468 programming software.