Keeping this clean prevents the compressor from overheating. Troubleshooting Common Issues
If your home utilizes multiple remote controllers (such as one in the bathroom and one in the kitchen), check the . If it is dark, press the Priority button. The light will glow solid green, indicating that this controller can now set the temperature.
The TGC BC-90-1H manual is a comprehensive guide that provides users with a detailed understanding of the device's features, operations, and maintenance. The manual covers various aspects, including:
Alongside the displays, you'll find three primary buttons: tgc bc-90-1h manual
Based on standard manual procedures for this series:
Available for Town Gas or LPG (verify your specific model label). Dimensions: 900mm (Width) x 510mm (Depth). Cut-out Size: 860mm (Width) x 480mm (Depth).
: It uses a double-glazed glass door and internal LED lighting to provide visibility while maintaining thermal insulation. Maintenance Tips Keeping this clean prevents the compressor from overheating
Press the Preheat button again. The light will turn off.
If the priority light is not on, press the [Priority] button. You cannot change settings unless the priority light on your specific remote is lit.
TGC BC-90-1H is a specialized remote control for installations, primarily used with Towngas instantaneous gas water heaters The light will glow solid green, indicating that
: Grants control authority to the specific panel you are standing in front of (e.g., the bathroom). Temperature adjustments can only be made on the controller that holds active priority.
remote control includes several essential features for managing water temperature and safety: Included Accessory
: Wipe the display surface gently with a soft, damp microfiber cloth. Never use abrasive pads, paint thinners, benzene, or acid-based bathroom cleaners , as they degrade the plastic buttons and damage the internal sealing gasket.
Use the arrow keys to adjust between a low setting of up to a maximum safety threshold of 48°C for typical use.
A slight backward tilt (no more than 1 centimeter) helps the glass door close automatically and seal tightly. Operating instructions & Temperature Control