Chevron | Digital Timer Ew-32 User Manual !!better!!

Press the "Clock" or "Time" button to return to the main display. Advanced Features

The EW-32 allows up to 8 separate ON and OFF events. For example: Light ON at 6:00 PM (Event 1), OFF at 11:00 PM (Event 1), Pump ON at 5:00 AM (Event 2), OFF at 7:00 AM (Event 2).

The AM/PM indicator was set incorrectly during clock or program setup.

Display shows “AUTO” or “MANUAL” depending on model.

Press the manual toggle until AUTO is active. Re-verify that both 1 ON and 1 OFF share identical day-of-the-week combinations. The timer turns on 12 hours late or early. chevron digital timer ew-32 user manual

Press the (or TIMER ) button once. The screen will display 1 ON on the left side, indicating you are configuring the first turn-on time. Step 2: Select the Days of the Week

Many users cry "It's not working!" because they misunderstand this slider. Locate the small 4-position switch:

October 2023 Product Focus: Chevron EW-32 Digital Programmable Timer

Press and hold both the and TIMER buttons simultaneously. The clock will instantly advance by one hour, and a "SUMMER" icon will appear on the screen. Repeat the action to revert the time back in the winter. 4. Programming the ON/OFF Schedules Press the "Clock" or "Time" button to return

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

If you prefer the official manufacturer’s guide:

Reset/clear:

Before programming your device, familiarize yourself with its physical layout and electrical limitations. Key Features The AM/PM indicator was set incorrectly during clock

You must hold the button while adjusting time settings.

| Specification | Detail | | :--- | :--- | | | Chevron EW-32 | | Voltage | 120 VAC, 60 Hz | | Max Load | 15 A General / 10 A Tungsten / 1 HP Motor | | Programs | 8 ON/OFF events | | Min Interval | 1 minute | | Battery Backup | 80 mAh Ni-MH (Rechargeable) | | Operating Temp | -10°C to 55°C (14°F to 131°F) | | Certification | UL Listed, RoHS Compliant |

A clock or icon will appear, and the current time will advance by one hour. Repeating the action removes the icon and moves the time back. 7. Troubleshooting and FAQ The screen is completely blank. What should I do?

| Feature | What the Manual Says | Real-World Usability | |---------|----------------------|------------------------| | | Press and hold CLOCK , press HOUR / MIN , release CLOCK . | Works, but CLOCK is also used to exit programming – easy to lose changes. | | Programming (ON/OFF) | Press PROG once → set ON time → press PROG again → set OFF time. | Logical, but manual doesn’t emphasize that you must set both ON and OFF in sequence for one event. | | Random security mode | Hold RANDOM for 3 sec → “RND” appears. | Manual explains it turns device on/off unpredictably within ±30 min of set times – good for vacation mode. | | Summer time (DST) | Press +1h button. | Works instantly, but manual doesn’t warn that this shifts all programs unless you disable it. | | Battery backup | “Retains programs during short power outage” – no mention that display may go blank. | Many users think it’s broken; actually, it keeps time internally but screen may dim. |

Press the button again to save the start time. The display will change to "1 OFF" .