After successfully programming your radio, immediately save your codeplug (File > Save As > My_TC700_Backup.hy7 ). This backup is your lifeline if the settings ever get wiped accidentally.
Verify your assignment. If your PC maps the cable to a port higher than COM8, the legacy software might not recognize it. Reassign it to COM1 through COM4 inside Device Manager.
Once you have downloaded the or PCS700.exe file, follow these steps to get started: Phase 1: Installation hyt tc 700 programming software download top
The primary software used for this model is .
: Along with the CPS software, download the USB-to-Serial programming cable driver (usually Prolific or FTDI drivers), which is necessary for your PC to recognize the programming cable. If your PC maps the cable to a
The software is often available through professional radio forums and manufacturer-linked portals:
: Turn the radio on, click "Read" to pull current settings, modify frequencies or features, and then click "Write" to save the new configuration back to the device. : Along with the CPS software, download the
: Most cables require a specific USB-to-Serial driver (often Prolific or FTDI) to be recognized by your computer’s Device Manager . 3. Basic Programming Steps
[Connect Cable to Radio] │ ▼ [Turn Radio On (Full Volume)] │ ▼ [Select COM Port in Software] │ ▼ [Read Data from Radio] ───► (Backup original settings first!) │ ▼ [Edit Frequencies / Channels] │ ▼ [Write Data back to Radio] Critical Rules During Programming while reading or writing data. Ensure the radio battery is fully charged before starting.
The software provides a streamlined interface to manage the technical parameters of the radio: Frequency Management
If the software rejects a frequency, check if your TC-700 model is the UHF or VHF version. You cannot program a VHF frequency into a UHF radio.
