The rear of the Magic Pass 4300 features a multi-pin terminal block for access control integration.
The MagicPass 4300, often manufactured by or associated with Anviz technology, is a biometric terminal used for time attendance and access control. This guide provides a comprehensive overview of the device's technical specifications and core operations. 1. Hardware Overview and Key Features
Supports 125kHz or 13.56MHz cards (depending on model) for dual-factor authentication.
Clean the fingerprint prism regularly with a dry cloth or specialized lens cleaner to ensure accuracy. magic pass 4300 user manual
High-intensity ambient light destabilizes optical fingerprint sensors and causes recurring verification failures.
Set : Enter your primary corporate router address (e.g., 192.168.1.1 ).
In the system options, you can set basic device information: The rear of the Magic Pass 4300 features
, such as enrolling a new user or resetting the admin password? HIT Magic Series User Guide | PDF | Access Control - Scribd
Connect the power supply and communication cables (TCP/IP is recommended for network management). The Magic Pass 4300 Go to product viewer dialog for this item.
Test the connection. Once linked, use the software's utility to automatically download logs over the network. 6. Troubleshooting and Maintenance Regular care prevents sensor failures and system lockouts. Common Issues and Solutions 192.168.1.1 ). In the system options
Base tier. Employees assigned this status can only perform authentications (scanning their finger or entering a PIN) to log attendance or pass doors. Configuration and Management Steps 1. Initial Menu Activation Press the Menu/M key on the integrated backlight keypad.
Connect the wires and slide the unit onto the backplate, securing it with the lower locking screw. 3. Initial Setup and Configuration
If your administrator leaves the company and the menu is locked, connect the device to your local software client via network cable and use the "Clear Admin Privileges" command directly from the PC interface. Cleaning the Optical Sensor