Bg2-w09 Test Point !free! -

Establish the test point connection to open the COM communication channel. Select or Flash .

: When the standard recovery or fastboot modes are inaccessible. Summary of Specs & Support

Incorrectly shorting test points can potentially damage the motherboard if proper precautions are not taken. Always disconnect the battery before working on the mainboard, and use proper ESD protection. bg2-w09 test point

Once the port appears, immediately from the motherboard. The connection mode is now locked in. Flashing the Firmware After Test Point Success

Carefully remove the back cover of the Huawei MediaPad T3 7.0 (BG2-W09). Establish the test point connection to open the

A test point consists of small, exposed copper pads located directly on a device's motherboard (PCB). Manufacturers use these pads during factory production to test hardware components and flash initial firmware.

Using it feels like performing CPR on a dead tablet. You’ll need: Summary of Specs & Support Incorrectly shorting test

The test point is located near the MediaTek CPU area.

To unclip the back shell without scarring the aluminum-plastic body housing.