Use your spirit level to double-check that the arm is level. This is your final chance to make adjustments before the unit is hung, which will prevent uneven wear and operational issues.
use the appliance with the older Wella ST3 pedestal. The unit may become unstable and fall, causing injury. Device Setup Ensure the main ON/OFF switch (8) is accessible.
: The mobile pedestal unit stands approximately 1350mm high, with a depth of 850mm and a width of 600mm.
Position the wall bracket so that the pivot point sits roughly 1.8 to 2.0 meters (5.9 to 6.5 feet) above the finished floor level. This ensures optimal clearance when the arm is extended over a styling chair. wella climazon millenium manual install
The primary processing ring with infrared sensors.
Use the integrated cable holder (standard on ST5 models) to secure the power cord, preventing tripping hazards during salon use. 3. Wall-Mounted Installation: Step-by-Step
I recently had to reinstall an older Wella Climazon Millennium dryer in my salon after a control panel malfunction. The original paper manual was long gone, so I found a digital copy of the Wella Climazon Millennium Manual Install online. Use your spirit level to double-check that the arm is level
Slide the upper chrome height-adjustable pole into the lower pole section.
Elena carefully lifted the hood assembly, guiding the pivot arm into the top of the column. She aligned the bolt holes. The manual warned not to overtighten, or the arm wouldn't swing freely. She threaded the bolts in, leaving just enough play for the mechanism to breathe.
Push the three swivel castors into the pre-drilled holes on the underside of the pedestal base until they click into place. Ensure they are secure to prevent the unit from tipping. The unit may become unstable and fall, causing injury
Are you installing the or the mobile pedestal version?
The Wella Climazon Millennium is shipped in two primary configurations: the mobile pedestal model or the space-saving wall-mount model. Follow the appropriate section below for your unit. Configuration A: Pedestal (Mobile) Model