Aei Dk 9830 Change Password Direct

If you have inherited a system and do not know the Master Code, you must perform a hardware reset to restore the factory default settings: Disconnect the power supply from the keypad.

To help provide the most accurate advice for your specific hardware setup, let me know: Is your keypad a or a surface mount model?

Should you encounter any persistent issues not covered here, consult the official AEI DK-9830 Installation and Operation Instructions, or contact a qualified security professional for assistance.

Indicator: The status LED will flash or change color (usually amber or orange), indicating the unit is ready for commands. aei dk 9830 change password

Press 5 → 01 → → [New 4–8 digit User Code] → # . 4. Exit Programming Mode Press the * key to return to normal operation mode. Troubleshooting: Forgot Your Code?

Reconnect power; the amber LED will flash and the buzzer will beep. Move the jumper back to "OFF." Press # once. The Master Code is now reset to 1234 .

Out of the box, the factory default Master Code is 0000 . If you have inherited a system and do

On the AEI DK 9830, this is often the first or second option in the admin submenu, labeled simply .

Before pressing any buttons, review these critical programming rules to avoid getting locked out of your system.

Find the "Direct Access to Programming" (DAP) jumper pins on the board. Indicator: The status LED will flash or change

You can customize how long the electric lock remains activated after a valid code is entered. The default is 3 seconds.

Relay 2 is often used for auxiliary gates, doorbells, or bypass systems. Memory locations range from slot 0 to 9 . Enter Programming Mode: Press * + . Select Relay 2 programming: Press 2 .

Press 0 followed by the # (pound) key.

The master code is now back to 1234 . Follow the steps in Section 1 to set a new password immediately.