Understanding the button layout ensures quick operation on the job site.
Aim at the first wall and press to capture the length. The icon's second side will now flash.
Press the until the Area Icon (a square symbol) appears on the display.
Instant square footage and cubic volume formulas built into the firmware. Point-N-Measure Digital Tape W5746 User Manual
Insert two AAA batteries, matching the polarity markings (+/-). Securely slide the cover back into place. Taking a Standard Laser Measurement Press the button to power on the device. Aim the laser dot at your target surface. Keep the device steady. Press the MEAS button again to lock in the reading. The distance will instantly display on the LCD screen. Area and Volume Calculations
Familiarize yourself with the control panel layout before taking critical measurements:
Short press toggles the measurement baseline starting point. Long press accesses stored historical data. 3. Getting Started Charging the Battery The W5746 features a rechargeable lithium-ion battery. Plug the included USB-C cable into the side port. Connect the cable to a standard 5V power adapter. Understanding the button layout ensures quick operation on
Understanding your device’s interface ensures fluid operation during complex layout jobs:
: The laser target surface is too dark or reflective. Use a white piece of paper or cardboard as a target target plate.
: Measures from the front edge where the laser emits. Use this for surface-to-surface line measurements. Press the until the Area Icon (a square
combines a standard metal tape measure (for short distances) with a laser distance measurer (for long-distance/remote measurements). It features a digital LCD screen for instant, easy-to-read, and precise readings. Key Features of the
The battery power is critically low. Replace both AAA batteries immediately to prevent inaccurate readings.