The tool will clear the drive, test the sectors, and rewrite the firmware. This can take anywhere from 2 minutes to over an hour depending on the size of the drive and the intensity of the bad-sector scanning.
For flash drives running on Firstchip controllers, (Mass Production Tool) is the official manufacturer software used to reflash the controller, repair bad sectors, and restore dead USB drives to factory settings.
: Fix errors where a 32GB drive suddenly shows up as 8MB or 0MB.
If your drive uses a newer chip, download the most recent chronological release available on the archive site to ensure maximum flash memory compatibility.
mp_tool.exe -p COM3 -f firmware.bin -w
Severe firmware corruption causing Windows to reject the device.
Enter (Mass Production Tool). This is the proprietary software used to low-level format, repair, restore capacity, and reprogram firmware on USB drives and SD cards that utilize Firstchip controllers. If you have a dead or malfunctioning flash drive with a Firstchip controller, the MPTool is your lifeline.
A drive that is detected as "Unknown Device," generates an "Insert Disk" error, or fails to mount can often be resurrected by reflashing the firmware.
Click the large or Run button located in the top-right corner. Firstchip Mptool Download
Before downloading, you must confirm your drive uses a FirstChip controller. You can use the ChipGenius Utility or Flash Drive Information Extractor to find the . Common supported chips include: USB 2.0: FC1178 (AB/BC/E/S), FC1179 (AA/AB/S), and FC2279. USB 3.0: FC3379 (AA/BB) and ZC3281 (AA/BB). Download FirstChip MpTool Versions
The (Mass Production Tool) is the official low-level formatting and firmware utility used in factories. It allows you to:
Enter the (Mass Production Tool). This piece of software is the key to resurrecting, repairing, and reconfiguring USB drives that use Firstchip (FC) controllers .
ChipGenius is a free portable tool that extracts hardware information from connected USB devices. Step 2: Analyze Your Drive Insert your corrupted USB drive into a PC port. Launch . Locate your USB drive in the device list. The tool will clear the drive, test the
Assuming you have identified your controller (e.g., FC1179), here is the correct workflow.
But before you hit that download button, there are critical things you need to know. Let’s break it down.
If you want, I can:
Common scenarios requiring Firstchip MPTool: : Fix errors where a 32GB drive suddenly
: The software often launches in Chinese; users typically need to change the setting to English in the right-hand column. Mass Production Process : After the drive is detected, clicking