Because Terow runs on standard ESC/POS commands, a generic POS-58 Thermal Printer Driver or Xprinter 58mm Driver will often serve as a flawless, fully functional alternative if the branded Terow driver is unavailable.
Accept the license agreement and choose your installation directory.
: Plug the power cable into the circular port on the back and then into a wall outlet. Connect Data
Ensure the printer is connected directly to the computer, not a USB hub. Key Features of the Terow 58mm Printer terow 58mm thermal printer driver full
| Feature | Generic ESC/POS Driver | Terow Full Driver | |---------|------------------------|-------------------| | Text printing | ✅ Yes | ✅ Yes | | Barcode printing | ❌ No (only ASCII text) | ✅ Yes (Code128, QR) | | Logo printing | ❌ No | ✅ Yes (BMP/PNG) | | Cash drawer control | ❌ No | ✅ Yes | | Paper cut command | ❌ No | ✅ Yes (if hardware supports) | | Printer status monitor | ❌ No | ✅ Yes (low paper, overheating) | | COM port emulation over USB | ❌ No | ✅ Yes (for legacy POS) |
I can provide the specific or configuration settings based on your setup.
Clean the thermal print head with a cotton swab dipped in rubbing alcohol to remove paper dust. If that fails, adjust the "Print Density" settings within the driver's Advanced Options panel to a higher value. Because Terow runs on standard ESC/POS commands, a
Instead, here’s a to find and install the correct driver for your 58mm thermal printer.
If your Terow 58mm isn't responding after installation, check the following:
Windows systems require the official POS58 printer driver package to communicate with the Terow hardware. Connect Data Ensure the printer is connected directly
When the installer instructs you, plug the USB cable from the printer into an active USB port on your PC. Click . The software will create a virtual USB printing port (e.g., USB001 or USB002 ) and add the device to your system. macOS and Linux Installation (CUPS)
Select if you are connected via a physical cable. (If multiple USB ports are listed, select the highest number, such as USB001 or USB002 ).
Click Install . Once the installation bar finishes, a prompt will ask to print a test page. Click Yes to verify successful deployment. macOS Installation