Cp Plus Camera Ip Finder - Software

If your PC has multiple adapters (Ethernet + Wi-Fi), choose the active one connected to the same switch as the camera.

Automatically scans the local network to find all connected CP Plus hardware. Batch Modification:

Think of it as a GPS for your security cameras. When you plug a CP Plus camera into your router or PoE switch, it receives a dynamic IP address from your DHCP server (usually your router). Unless you have a monitor connected directly to an NVR, you have no way of knowing that number. The IP Finder software solves this by sending out broadcast queries and listing every CP Plus device on your network with details like:

Essential for setting up brand-new cameras, enabling you to set secure administrator passwords and recovery email addresses upon first boot. cp plus camera ip finder software

Scans the network in seconds to list all connected CP Plus equipment.

Restores devices to factory default settings remotely. Why Do You Need an IP Finder Tool?

Are you setting up or troubleshooting an existing system ? If your PC has multiple adapters (Ethernet +

Ensure your computer and your CP Plus IP cameras are physically connected to the same network router or Power over Ethernet (PoE) switch. Step 2: Run a Network Scan

Download the version if you are using an Apple computer.

The Ultimate Guide to CP Plus Camera IP Finder Software Finding your security camera on a local network is the first step toward a secure surveillance setup. For users of CP Plus Closed-Circuit Television (CCTV) and Internet Protocol (IP) networks, the —officially known as the CP Plus ConfigTool —is the essential utility for this task. When you plug a CP Plus camera into

Disconnect the power source from the camera for 30 seconds, plug it back in, and click Refresh in the software. Conclusion

(Cross-Platform)

Remotely restart cameras or restore them to factory default settings. How to Download and Install CP Plus IP Finder

Once the tool is running, using it is straightforward. Below is a general step-by-step guide based on typical usage scenarios.

If you want a step-by-step guide on using it to change your camera’s IP, let me know.