Sma8 Manual | Caselabs

The SMA8 typically houses the PSU in the rear compartment (behind the motherboard tray) or in the Pedestal.

Check that the entire frame is square. Use a carpenter's square if available, or visually align the edges. Once squared, tighten all frame screws firmly across the entire chassis starting from the bottom up. Internal Components Installation

The chassis is built like a tank using a simple "tab and screw" philosophy. If you look at the case, 90% of the assembly is intuitive. caselabs sma8 manual

Unlike Corsair or Lian Li, CaseLabs did not host their manuals on a centralized, permanent cloud server in the modern sense. They relied on their now-defunct forum and direct PDF downloads.

You might wonder why anyone would hunt for a manual for a case that hasn't been made in eight years. The answer is The SMA8 typically houses the PSU in the

Updated to include USB 3.1 Type-C and better front-panel I/O options. Improved 560mm Mounts:

Specifically used for mounting 2.5-inch SSDs and certain optical drive brackets. Once squared, tighten all frame screws firmly across

CaseLabs closed in 2018.

Align the rear I/O panel with the back face of the chassis. Ensure the cutout for the power supply (in the lower chamber) and the motherboard I/O (in the upper chamber) match your intended layout orientation (Standard vs. Reverse ATX).