Zoje A6000-g 02 Manual Fixed Page

Ensure the machine is properly grounded before plugging it in to avoid electric shock.

Integrated, energy-saving Direct Drive AC Servo Motor Unboxing Checklist

Highlighting the high-speed capabilities of the A6000-G series. of this manual or explain a specific error code

The needle stops inside the fabric when the pedal is released. This is ideal for pivoting around corners. zoje a6000-g 02 manual

Mount the oil pan onto the table cutout, making sure the rubber corners fit securely to prevent oil leakage. Place the machine head carefully into the oil pan hinges. Electrical Connections

: Overvoltage or Undervoltage detection. Turn off the machine immediately. Verify your wall outlet power source and ensure no shared power strips are running heavy heating equipment.

What (e.g., skipped stitches, uneven tension, thread snapping) are you experiencing? Ensure the machine is properly grounded before plugging

: Keep the workspace clean, dry, and well-lit. Do not use the machine near explosive or highly flammable substances. 3. Initial Setup and Threading Procedure Needle Installation Turn off the power switch.

Adjust the thumb screw on top of the machine head above the needle bar area.

Pull the thread up to catch the needle take-up spring, pulling it upward until it clicks into the hook guide. This is ideal for pivoting around corners

Push the winder latch lever down against the bobbin; it will automatically disengage when the bobbin is full.

"Come on," he whispered, his finger hovering over the ‘Page Down’ key.

+-----------------------------------------------------+ | [ SPEED DISPLAY / PARAMETER VALUE ] (P) (S) | | | | [▲] Speed Up [▼] Speed Down [ Needle Up ]| +-----------------------------------------------------+ Basic Button Navigation