: The process begins with measuring and cutting the aluminum track to fit the specific staircase length. Stand feet are positioned and measurement clearances from the step nose and back wall are verified. The rail sections are then spliced together and secured to the stairs using lag bolts for each stand foot. Electrical Integration
The Levant uses a track system that must be mounted securely to the stair treads, not the wall. The manual provides a specific template for drilling. The "top" of the rail often requires cutting to length on-site. The manual specifies the exact angle for the cut to ensure the carriage sits level when parked at the top.
Even well‑maintained stair lifts can encounter occasional problems. Below are the most frequent issues reported by Levant owners, along with suggested solutions based on the user manual and expert advice.
The Levant model is engineered specifically for where reliability, low noise, and aesthetic integration are paramount. Unlike universal kits, the Levant rail is pre-measured and pre-cut for your specific staircase geometry based on the digital survey submitted by your certified dealer. thyssenkrupp levant stair lift installation manual top
When searching for installation details regarding the "top" of the stair lift, users are usually referring to one of two things:
Rotate the seat away from its locked driving position. Attempt to operate the lift; the unit must refuse to move until the seat is swiveled back and locked into its riding profile. Preventive Maintenance Overview
: Drive the lift to the absolute top and bottom. Ensure it slows down and stops automatically at the precise charging locations. : The process begins with measuring and cutting
[Top Charge Point] === (Upper Rail Section) === [Splice Joint] === (Lower Rail Section) === [Bottom Charge Point] | | [Mounting Feet] [Mounting Feet] Step 1: Laying Out the Rail Sections
: If adjustments are necessary, cut the rail from the bottom end to preserve the factory-finished top charging contacts. Remove all metal burrs after cutting. 2. Mounting the Rail Brackets
Two wireless call/send stations are installed: one at the top of the stairs and one at the bottom. These allow you to call the stair lift to your floor without having to walk to it. The stations are battery-operated, and the user manual provides instructions on changing the batteries [8†L22-L24]. Electrical Integration The Levant uses a track system
For many users, finding a digital copy of the is a top priority—especially when dealing with the "top" section of the rail or specific installation nuances.
: Attach the seat mounting bracket, followed by the seat and footrest. Safety Wiring
Position the legs/brackets under the rail. The Levant rail is usually mounted directly onto the treads of the staircase, not the wall, allowing for quick installation.